The features of N's CAP
The cell voltage is high !
The cells voltage of 3V contributes to the reductionin size and weigh of modules.
Large electric power & high efficiency
The ultra low resistance suppresses heat generation and IR drops.
Remarkable electrolyte
The high performance is realized by unique ionic liquid.
Highly safe
No ignition and explosion even by forced to nail penetration, over charge, reversed charge or short circuit.
Wide temperature range
The wide operating temperature range from -30 to 80°C enables in various applications.
Original equalizing circuit
Long life by accurate equalization of cell voltage.
Basic characteristics of N's CAP
* A picture is clicked to expand.
Temperature characteristics
Expansion
(New window will be opened.)
*25°C=100%.Charge and discharge: 0.8A CC
Safety of N's CAP
- No ignition even by forced nail penetration.
- No smoke, no ignition and no liquid leakage even forced by over charge.
- No amoke, no ignition and no liquid even forced by 10A continuos current test.
Applications of N's CAP
N's CAP is most suitable for applications which require rapid discharge and regeneration of large electric power.
- Automobile
- Engine start-up
- Energy generation recovery at braking
- Power supply of hybrid and FC car
- Industrial machines
- Power assist and peak cut (electric-load leveling)
- Energy regeneration recovery
- Momentary voltage drop
- Back up of power supply
- Railways
- Storage device for regenerative electric power
- Natural energy
- Power storage buffering
N's CAP modules
- The modules are equipped with original equalizing circuit. Long life by accurate equalization.
- Variable voltage modules available. Have sold modules of 15-750V.
| 15V Module | 100V Module | |
 |
 |
|
| • Incorporate voltage equalization circuit. | • Incorporate voltage equalization circuit. • Equipped with voltage equalization circuit between modules. |
|
| Capacitance | 200F | 29.4F |
| Rated voltage | 15V | 100V |
| DCIR | < 8mΩ | < 60mΩ |
| Power consumption | 6.2 Wh | 40.8 Wh |
| Max current | 600A (1sec.) | 600A (1sec.) |
| Operating temperature | -30 - 60°C | -30 - 60°C |
| Vibration proof | 4.5G | 4.5G |
| Size*1 | W 156mm D 67mm H 154mm |
W 295mm D 299mm H 200mm |
| Weight | 1.9kg | 13.5kg |
| Volume | 1.4L | 12.9L |
| 1000type 200V Module | 250type 400V Module | |
 |
 |
|
| • Incorporate voltage equalization circuit. • Equipped with voltage equalization circuit between modules. |
• Incorporate voltage equalization circuit. | |
| Capacitance | 14.7F | 1.8F |
| Rated voltage | 200V | 400V |
| DCIR | < 120mΩ | < 860mΩ |
| Power consumption | 81.6 Wh | 40.0 Wh |
| Max current | 600A (1sec.) | 300A (1sec.) |
| Operating temperature | -30 ~ 60°C | -30 ~ 60°C |
| Vibration proof | 1.0G | 1.0G |
| Size*2 | W 782mm D 202mm H 184mm |
W 192mm D 162mm H 696mm |
*2 : except attaching parts
# Other voltage modules are also available. Contact us for further information.
# Information on the above is subject to change without notice.
N's CAP cell
Compact, High power, High energy
You can choose the best N's CAP cell according to needs.
N's CAP "Power type" cells
| 250F | 1000F | |
 |
 |
|
| Capacitance | 250F +20 -0% | 1000F +20 -0% |
| Rated voltage | 3.0V | |
| ESR*1 | 2.3mΩ | 0.8mΩ |
| Max current | 300A at 1sec. | 600A at 1sec. |
| Size*2 | W 50mm H 100mm T 9.2mm |
W 135mm H 130mm T 9.2mm |
| Weight | 54g | 202g |
| Volume | 46mL | 162mL |
*1 : ESR(1kHz)
*2: except tab parts
# Information on the above is subject to change without notice.
*2: except tab parts
# Information on the above is subject to change without notice.
N's CAP "High power type" cells
| 250F | 1000F | |
 |
 |
|
| Capacitance | 250F +20 -0% | 950F +20 -0% |
| Rated voltage | 3.0V | |
| ESR*1 | 1.6mΩ | 0.6mΩ |
| Max current | 300A at 1sec. | 600A at 1sec. |
| Size*2 | W 50mm H 100mm T 9.2mm |
W 135mm H 130mm T 9.2mm |
| Weight | 66g | 205g |
| Volume | 46mL | 162mL |
*1 : ESR(1kHz)
*2: except tab parts
# Information on the above is subject to change without notice.
*2: except tab parts
# Information on the above is subject to change without notice.
♦ Comparison of power density between power type and high power type
| Capacitance | Power type | High power type |
|---|---|---|
| 250F | 10.4kW/L | 15.0kW/L |
| 1000F | 8.5kW/L | 11.4kW/L |
# Information on the above is subject to change without notice.
Copyright © 1996-2012 Nisshinbo Holdings Inc. All Rights Reserved.